产品展示
IT6510
产品详情
The IT6510 is a high-performance single-chip DisplayPort to MIPI-CSI/DSI converter. Combined with DisplayPort receiver, MIPI transmitter, the IT6510 supports DisplayPort input and MIPI-CSI/DSI output by conversion function.
The built-in DisplayPort receiver is fully compatible with DisplayPort 1.2a and HDCP 1.3/2.3 specifications. With 4-lane HBR2 (High-Bit-Rate 2) configuration, the DP receiver can support VESA resolution up to WUXGA (1920 x 1200@60 Hz) or WQXGA ( 2560 x 1600 RB@60 Hz) or support CEA resolution up to 1080P@120 Hz or 4K x 2K@30 Hz.
The built-in MIPI transmitter is fully compliant with D-PHY V1.2 specifications. With 4-lane data pair and each lane can support up to 2.5G.
IT6510 is easy to program through the I2C interface.
Each IT6510 comes preprogrammed with an unique HDCP key, in compliance with the 1.3/ 2.3 --Amendment for DisplayPort, rev1.0 so as to provide secure transmission of high-definition content. Users of the IT6510 need not purchase any HDCP keys or ROMs.t.
产品特点
- DisplayPort Receiver
- Compliance with DisplayPort Specification V1.2a at 1.62/2.7/5.4 Gbps data rate (Low bit rate/High bit rate/High bit rate 2)
- Support flexible 1/2/4 lanes configurations; Full 21.6 Gbps data rate support (4 lanes at 5.4 Gbps)
- Support DPCD Rev.1.2
- Support HDCP 1.3/2.3 with HDCP key embedded
- Support 3D display left/right field/frame
- Support Spread Spectrum Clocking up to 0.5% down-spread to reduce EMI
- Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients
- Support 8-channel, uncompressed LPCM I2S audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits, and HBR audio
- Automatic loss of signal detection for Link management
- Intelligent, programmable power management
- Embedded two blocks EDID RAM to saving BOM cost
- Compliance with "DP only" or "DP++" source device
- MIPI-CSI/DSI dual mode Transmitter
- Support 1/2/4-lane MIPI CSI/DSI transmission
- D-PHY TX interface of up to 2.5G per lane
- Compliant with D-PHY V1.2 specifications and de-skew calibration
- Compliant with MIPI CSI-2 Specification
- Compliant with MIPI DSI Specification V1.2
- Support pixel rates of up to 300 MHz for 4K x 2K@30 Hz
- Support 30/24/18 bits RGB in DSI mode
- Support 888/666/565 RGB, 10b/8b YUV422, and 8b YUV420 format in CSI mode
- Support Escape and ULPS mode
- Support Lane Swap and PN Swap
- Video Processor supports CSC
- Support interlaced mode and toggling frame number in CSI mode
- Support Sync pulse mode and Sync event mode in DSI operation
- Common Features
- Support up to 1080P@120 Hz, 4K x 2K@30 Hz CEA display format
- Support DP input color depth 6/8/10/12 bits
- Support MIPI output color depth 8/10/12 bits
- 4 I2S interface supporting 8-channel audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits
- S/PDIF interface supporting PCM digital audio at up to 192 kHz frame rate
- HBR audio up to 768 kHz
- Automatic Audio Error detection with soft mute function, preventing annoying harsh output sound due to audio error or hot-unplug
- 88-pin QFN (10 mm x 10 mm) package
- RoHS Compliant (100% Green available)
复制产品链接
长按图片保存/分享
