产品展示
IT6122
产品详情
The IT6122 is a high-performance and low-power MIPI to LVDS converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and LVDS specifications. The IT6122 supports four lanes MIPI RX and 2-Link LVDS TX interface. The data transfer rate of MIPI RX is up to 1 Gbps per lane and the LVDS TX supports as high as 1.05 Gbps per channel.
IT6122 support MIPI DSI packed pixel stream 24-bit RGB888, loosely packed pixel stream 18-bit RGB666 and packed pixel stream 18-bit RGB666 mode, the sync even short packets can be received and generate HSync and VSync by firmware setting. A Pattern Generator is embedded in the IT6122 and thus the video data and timing can be easily switched from external MIPI RX to internal pattern generator for testing. The 18 bits or 24 bits LVDS data by VESA mode or JIDEA mode can output by 1 or 2 LVDS link.
MIPI input 1/2/4-lane swap and LVDS output link swap, channel swap and PN swap can be controlled separately for flexible circuit layout.
IT6122 provides I2C interface for firmware setting . Please refer to the IT6122 Programming Guide if necessary.
产品特点
- 4-lane MIPI RX with total 4 Gbps bandwidth
- Compliant with MIPI D-PHY 1.1 and DSI 1.1 specifications
- 2-Link LVDS TX up to 1.05Gbps channel speeds
- Supporting the following 24-bit RGB 4:4:4 progressive video formats:
- - DTV resolutions: 480p, 576p, 720p, up to 1080p
- - PC resolutions: VGA, SVGA, XGA, up to SXGA.
- Various Packed Pixel Stream of DSI are supported, such as:
- - 18/24 bit RGB 4:4:4
- - 18-bit RGB 4:4:4 (Loosely)
- Flexible MIPI Rx lane swap and P/N swap configuration
- Flexible LVDS Tx link swap, channel swap and P/N swap configuration
- Embedded full-function pattern generator
- Support Reduced Swing LVDS for Low EMI, Programmable voltage swing (190 mV ~ 350 mV)
- Support LVDS output with VESA or JEIDA format
- Intelligent, programmable power management
- 56-pin (7 x 7 mm) QFN package
复制产品链接
长按图片保存/分享
