产品展示
IT6563
产品详情
The IT6563FN is a high-performance single-chip DisplayPort to HDMI converter. Combined with DisplayPort receiver and HDMI transmitter, the IT6563FN supports DisplayPort input and HDMI output by conversion function.
The built-in DisplayPort receiver is fully compatible with DisplayPort 1.2a and HDCP 1.3/2.2 specifications. With 4-lane HBR2 (High-Bit-Rate 2) configuration, the DP receiver can support VESA resolution up to WUXGA (1920 x 1200@120 Hz) or WQXGA (2560 x 1600 RB@120 Hz) or support CEA resolution up to 1080P@120 Hz or 4K x 2K@60 Hz. This DisplayPort receiver also supports MCCS over AUX channel.
The built-in HDMI transmitter is a high-performance HDMI 2.0 transmitter, fully compliant with HDMI 2.0, HDCP 1.4/2.2 and backward compatible with DVI 1.0 specifications. This HDMI transmitter can support color depth up to 36 bits (12 bits/color) and ensures robust transmission of high-quality uncompressed video content. Aside from the various video output formats supported, this HDMI transmitter also supports 8-channel digital audio, with sampling rate up to 192 kHz and sample size up to 24 bits, and HBR audio.
With embedded MCU and Flash, IT6563FN is easy to program through the ISP interface or DP AUX channel. Customers need no external Flash and MCU, which saves the BOM cost and board size.
Each IT6563FN comes preprogrammed with an unique HDCP key, in compliance with the 1.3/2.2 --Amendment for DisplayPort, rev 1.0 and HDCP 1.4/2.2--HDMI compliance standard so as to provide secure transmission of high-definition content. Users of the IT6563FN need not purchase any HDCP keys or ROMs.
产品特点
Features (DisplayPort Receiver)
- Compliance with DisplayPort Specification V1.2a at 1.62/2.7/5.4 Gbps data rate (Low bit rate/High bit rate/High bit rate 2)
- Support flexible 1/2/4 lanes configurations; full 21.6 Gbps data rate support (4 lanes at 5.4 Gbps)
- Support DPCD Rev.1.2
- Support metadata transport for static High Dynamic Range (HDR)
- Support HDCP 1.3/2.2 with HDCP key embedded
- Support MCCS over AUX
- Support 3D display left/right field/frame
- Support Spread Spectrum Clocking up to 0.5% down-spread to reduce EMI
- Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients
- Support 8-channel, uncompressed LPCM I2S audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits, and HBR audio
- Automatic loss of signal detection for Link management
- Intelligent, programmable power management
- Embedded two blocks EDID RAM to saving BOM cost
- Compliance with "DP only" or "DP++" source device
Features (HDMI Transmitter)
- Single channel HDMI transmitter
- Compliant with HDMI 2.0b, HDCP 1.4/2.2 and DVI 1.0 specifications
- Supporting link speeds of up to 6.0 Gbps (link clock rate of 600 MHz)
- Support 8-channel, uncompressed LPCM I2S audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits, and HBR
- Support Gamut Metadata packet for High Dynamic Range (HDR)
- Software programmable, auto-calibrated TMDS source terminations provide for optimal source signal quality
- Software programmable HDMI output current, enabling user to optimize the performance for fixed-cable systems or those with pre-defined cable length
- Integrated pre-programmed HDCP keys
- Purely hardware HDCP engine increasing the robustness and security of HDCP operation
- Monitor detection through Hot Plug Detection and Receiver Termination Detection
- Embedded full-function pattern generator
- Intelligent, programmable power management
- Support CEC
Features (Common Features)
- Support up to WUXGA (1920 x 1200@120 Hz), WQXGA (2560 x 1600 RB@120 Hz) VESA display format
- Support up to 1080P@240 Hz, 4K x 2K@60 Hz CEA display format
- Support DP input color depth 6/8/10/12 bits
- Support HDMI output color depth 8/10/12 bits
- Digital audio output interface supporting
- o One I2S interface supporting 2-channel audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits
- o S/PDIF interface supporting PCM digital audio at up to 192 kHz frame rate
- o HBR audio up to 768 kHz
- Embedded MCU and Flash
- Automatic Audio Error detection with soft mute function, preventing annoying harsh output sound due to audio error or hot-unplug
- 56-pin QFN (7 mm x 7 mm) package
- RoHS Compliant (100% Green available)
复制产品链接
长按图片保存/分享
