产品展示
IT66353
产品详情
The IT66353 is an HDMI 2.0, 3 IN to 1 OUT re-timer switch which supports maximum signaling rate of up to 6 Gbps/channel. It is compliant with the latest HDMI 2.0b specification and backward compatible with the HDMI 1.4 and DVI specifications. With 6 Gbps/channel capability, the IT66353 can support ultra-high resolution content streams, such as 4K x 2K@50/60 Hz video formats. With the re-timer structure, the IT66353 can support superior performance for long cable application.
All 3 input ports and 1 output port support HDMI 2.0 data rate of up to 18 Gb/s.
The IT66353 also provides a complete solution of Consumer Electronics Control (CEC) function. This optional CEC feature of HDMI specification allows the users to control two or more CEC-enabled devices through HDMI network. With IT66353 embedded CEC PHY, users can use high-level software API to easily implement all the necessary remote control commands. The CEC bus related protocol is handled by the CEC PHY which eliminates extra loading of the MCU.
产品特点
- Switch 3 HDMI 1.4/HDMI 2.0 (18 Gb/s) input ports to 1 HDMI 1.4/HDMI 2.0 (18 Gb/s) output port
- Compliant with HDMI 1.4b, HDMI 2.0b, and DVI 1.0 specifications
- On-chip EDID RAM for each input port
- Re-timer structure to get superior TMDS eye diagram quality
- Support adaptive and programmable input equalization for long and short cables
- Support auto-calibrated and programmable TMDS output current level, with optional output pre-emphasis and source termination
- Support output TMDS R/G/B/C channel swapping
- Monitor detection through Hot Plug Detection and Receiver Termination Detection
- Intelligent, programmable power management
- Auto-detect the plug-in status for non-active input ports
- Embedded hardware controlled CEC PHY
- 76-Pin 9 x 9 QFN package
- RoHS Compliant (100% Green available)
复制产品链接
长按图片保存/分享
