产品展示
IT6264
产品详情
The built-in HDMI transmitter is fully compliant with HDMI 1.4b/2.0b, HDCP 1.4/2.2 and backward compatible with DVI 1.0 specifications. The IT6264 also supports all the HDMI 2.0b 3D mandatory formats which are compliant with HDMI 1.4a 3D Specification. The IT6264 supports up to 4K x 2K@60 with 30-bit (10-bit/color) high-quality uncompressed video content, along with the state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD.
As for the video content, YCbCr 4:2:0 pixel encoding and BT.2020 colorimetry defined in HDMI 2.0 are supported by the IT6264, which can be applied to the 4K x 2K formats nowadays. Not only the original 3D video formats but the new defined 3D video extension formats such as 3D Dual-View and 3D Independent View are also supported by the IT6264. With this extension, the 3D video could be used to transmit two independent contents for different applications.
Aside from the various video output formats supported, in HDMI 1.4 environment, the IT6264 also encodes and transmits up to 8 channels of I2S digital audio, with sampling rate up to 192 kHz and sample size up to 24 bits. In addition, an S/PDIF input port takes in compressed audio of up to 192 kHz frame rate, while Super Audio Compact Disc (SACD) is supported through eight DSD (Direct Stream Digital) ports. If the sink supports HDMI 2.0 3D audio capability, the IT6264 can be programmed to transmit audio up to the maximum of 12 channels using six I2S or twelve DSD ports.
The High-Bit Rate (HBR) audio is provided by the IT6264 in two interfaces: with the four I2S input ports or the S/PDIF input port. With I2S interfaces, the highest possible HBR frame rate is supported at up to 1536 kHz.
Each IT6264 chip comes preprogrammed with a unique HDCP key, in compliance with the HDCP 1.4 and HDCP 2.2 standard so as to provide secure transmission of high-definition content. Users of the IT6264 need not purchase any HDCP keys or ROMs.
The IT6264 also provides a complete solution of Consumer Electronics Control (CEC) function. This optional CEC feature of HDMI specification allows users to control two or more CEC-enabled devices through HDMI network. With IT6264's embedded CEC PHY, users can use high-level software API to easily implement all the necessary remote control commands. The CEC bus related protocol is handled by the CEC PHY, which eliminates extra loading of the MCU.
产品特点
- Support LVDS 1/2/4 Link Receiver
- Support input color depth up to 10 bit
- Support De-SSC (De-Spread Spectrum)
- Support Data Mapping: Open LDI, JEIDA, VESA
- Support input link clock rate up to 150 MHz
- Single HDMI transmitter
- Support output channel swap and P/N swap
- Compliant with HDMI 1.4b, HDMI 2.0b, HDCP 1.4, HDCP 2.2 and DVI 1.0 specifications
- Support link speeds of up to 6 Gbps
- Various video input interface supporting digital video standards such as:
- 24/30/36-bit RGB/YCbCr 4:4:4 with RB swap option
- 16/20/24-bit YCbCr 4:2:2 with YC swap option
- 24/30/36-bit YCbCr 4:2:0
- BT.2020 Colorimetry
- Support HDMI 1.4 3D feature
- Frame packing mode up to 1080P@23.98/24 Hz and 720P@59.94/60 Hz
- Top and bottom up to 1080P@59.94/60 Hz
- Side-by-side (half) up to 1080P@59.94/60 Hz
- Side-by-side (full) up to 720P@59.94/60 Hz
- Support HDMI 2.0 3D feature
- Frame packing mode up to 4K x 2K@23.98/24/30 Hz and 1080P@59.94/60 Hz
- Top and bottom up to 4K x 2K@59.94/60 Hz
- Side-by-side (half) up to 4K x 2K@59.94/60 Hz
- Side-by-side (full) up to 1080P@59.94/60 Hz
- Support 3D Dual-View and 3D Independent View
- Support HDMI 2.0b Dynamic Range and Mastering InfoFrame for HDR video
- Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients
- Support YCbCr 4:2:0 to RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2 conversion
- Support gamut metadata packet
- Support digital audio input interface
- up to six I2S interfaces supporting maximum 12-channel 3D audio, with sample rates of 32~192 kHz and sample sizes of 16~24 bits
- S/PDIF interface supporting PCM, Dolby Digital, DTS digital audio at up to 192 kHz frame rate
- Support high-bit-rate (HBR) audio such as DTS-HD and Dolby TrueHD through the four I2S interface or the S/PDIF interface, The maximum frame rate is as high as 1536 kHz
- Support maximum 12-channel 3D DSD audio through twelve inputs
- Compatible with IEC 60958 and IEC 61937
- Support multi-stream and one bit multi-stream audio packets
- Software programmable, auto-calibrated TMDS source terminations provided for optimal source signal quality
- Software programmable HDMI output current, enabling users to optimize performance for fixed-cable systems or those with pre-defined cable length
- MCLK input optional for audio operation
- Users could opt to implement audio input interface with or without MCLK
- Integrated pre-programmed HDCP keys
- Purely hardware HDCP engine increasing robustness and security of HDCP operation
- Monitor detection through Hot Plug Detection and Receiver Termination Detection
- Embedded full-function pattern generator
- Intelligent, programmable power management
- Embedded hardware controlled CEC PHY
- 128-pin LQFP package
复制产品链接
长按图片保存/分享
